Prism Tail Light LEDs are direct replacements associated with Prism Supply tail lights. Prism Supply tail light assembly not included.
Box Chopper LED | Generation 2 Info:
- The second generation of the Box Chopper LED boards will not fit into the box chopper generation 1 housings. If you need a replacement for the generation 1 housing you will have to run the gen 1 replacement.
- The gen 2 LED boards contain a unique connector that allows you to easily swap wires out to run our Vintage Cloth Covered Wire.
- Want to run a single wire out of your tail light? The gen 2 LED boards also ground through the housing with one of the mounting screws which removes your ground wire all together making it even easier to run our Single Wire Tail Light Magic Box/ Single Wire Hydraulic Brake Switch. See more info here.
1.85" LED | Generation 1 & 2 Info:
- Both the Generation 1 & 2 of the 1.85" LED boards will be a direct replacement for all 1.85" round tail lights and generation 1 PS-41 housings. However, the 1.85" Generation 1 LED board will not retrofit into the generation 2 PS-41 housing. If you have a generation 2 PS-41 housing, you will need the 1.85" generation 2 LED.
- The gen 2 LED boards contain a unique connector that allows you to easily swap wires out to run our Vintage Cloth Covered Wire.
- Want to run a single wire out of your tail light? The gen 2 LED boards also ground through the housing with one of the mounting screws which removes your ground wire all together making it even easier to run our Single Wire Tail Light Magic Box / Single Wire Hydraulic Brake Switch. See more info here.
If you have any questions about fitment on your bike, we have put together 1:1 scaled drawings. You can print these on an 8.5"x11" sheet of paper and cut them out to use as templates for test fitment on your bike. Safari users may need to right click to download.