PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS - 41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply
PS-41 Tail Light - Prism Supply

PS-41 Tail Light

0203735

$119.99 USD
/
Finish
  • In stock, ready to ship
  • Inventory on the way

This is the second generation Prism version of the "RH-55 Guide Light" that originally came on panheads and ironheads. Overall dimensions are 3.375" x 2.5" x 1" thick, 30% smaller than the original. It's equipped with a dual function LED cluster that acts as both a brake light and running light.

The second generation contains unique features on the LED board that allow you to easily swap wires out to run our Vintage Cloth Covered Wire. In addition, you can also ground through the housing which removes your ground wire all together making it even easier to run our Single Wire Tail Light Magic Box/ Single Wire Hydraulic Brake Switch. See more info here.

  • Injection molded Prism Supply lens.
  • The housing is made of aluminum and comes in either a polished or brushed finish.
  • Wires exit through a grommet on the back of the housing.
  • Comes with two stainless steel 1/4-28 bolts for mounting.

Any of the following mounting brackets will work with this light:

If you have any questions about fitment on your bike, we have put together 1:1 scaled drawings. You can print these on an 8.5"x11" sheet of paper and cut them out to use as templates for test fitment on your bike. Safari users may need to right click to download.

1:1 Drawing | PS-41 Tail Light

Related

Customer Reviews

Based on 10 reviews
100%
(10)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
100.0
C
C.A.

Best light on the market

C
C.F.
Ps-41 fail

Couldn’t be more bummed about this tail light. Out of the box the brake light didn’t work. The running light did. Let prism know and they showed me how to buy their new improved one. Thanks for sending me the crap one and showing me how to spend an additional 30$ on the updated one. So I bought the new led module, and when going to install it, the lens cover is cracked in 3 places from the maybe 200 miles of riding vibration. The machined plate is great, the lens cover is garbage plastic and light itself is pretty janky.

C
Customer

Great experience as usual! Fast shipping, FANTASTIC PRODUCTS and great service. Prism Supply rules. Thanks again! A+++

J
Jesse

Good looking light and not bulky but nice and thin

S
Sisi Brambell
So sick.

Great product from great people, I have bought a few parts from Prism and they don’t disappoint. Highly recommend

12